Gator Fabric GF20
Polyspun for Garden and Landscape Coverings
Description
Gator Fabric GF20 polyspun is an excellent geotextile that protects against the growth of weeds. It is specially formulated to resist deterioration due to exposure to ultraviolet light and is inert to commonly encountered soil chemicals.
Applications & Benefits
Applications
- Garden and landscape covering
- Mulch or decorative rock garden
- Separation barrier for plantation
Benefits
- Creates a barrier that reduces weed growth
- Allows water, fertilizer and air to pass through
AVAILABLE IN THE FOLLOWING ROLL SIZES
| GF20-0305000 | Polyspun | 3´ x 50´ |
| GF20-0310000 | Polyspun | 3´ x 100´ |
| GF20-0405000 | Polyspun | 4´ x 50´ |
| GF20-0410000 | Polyspun | 4´ x 100´ |
| GF20-0610000 | Polyspun | 6´ x 100´ |
| GF20-0630000 | Polyspun | 6´ x 300´ |
Installation
Step 1
Excavate the soil in the location of the project according to best practices.
Step 2
With a rake, even out and level the soil as the underbed of your landscape installation.
Step 3
Apply GATOR FABRIC GF 20 Polyspun Geotextile to the entire base of the landscape installation and trim to size.
Step 4
Spread mulch or selected ground cover on top of installed geotextile, then plant flowers and bushes according to desired landscape.
* Disclaimer for GF 20
Information regarding the physical properties, performance and permitted use of Alliance Designer Products Inc.’s Gator Fabric products is, to the best of our knowledge, reliable. However, Alliance Designer Products Inc. assumes no liability for the accuracy or completeness of this information or for its ultimate use. As Alliance Designer Products Inc. has no control over methods of use and field conditions, Alliance Designer Products Inc. disclaims all warranties, expressed or implied, including, without limitation, the warranties of merchantability and/or fitness for a particular purpose and as to quality. The final determination as to the appropriateness or suitability of any Gator Fabric product in any particular application rests with the end user and is the end user’s sole responsibility. This document should not be construed as engineering advice.