Menu
Polybind Rust Remover

Polybind Rust Remover

For Concrete Pavers, Wetcasts and Natural Stone

Description

Polybind Rust Remover is effective in removing rust on the surface of concrete pavers and natural stones.

Features

  • Removes the spots caused by steel, water build up, fertilizer, etc.
  • Contains no muriatic acid.
  • Easy to use

Application & Instructions

Instructions

  1. Apply product on stain.
  2. Let it soak for 2-3 minutes.
  3. Scrub with a hard bristle brush.
  4. Rinse thoroughly with water.
  5. Repeat step 1 to 4 until the stain dissolves.
Notes

  1. Do not let product dry up on paver surface.
  2. Wear goggles and rubber gloves.
  3. After using the POLYBIND RUST CLEANER Remover on various spots, clean the entire paver surface with POLYBIND CLEAN EFFLORESCENCE CLEANER for an overall uniform color

Coverage

Products Retail Size Per Box Per Pallet
Polybind Rust Remover 946ml 6 units 24 boxes

Video

Limited warranty

Alliance Designer Products inc. cannot guarantee results as it has no control over surface preparation and product application. If this product is proven to be defective, on the condition that it was applied pursuant to the required method of application and surface preparation, the sole obligation of Alliance Designer Products inc. is to refund the purchase price. Proof of purchase is required for any claim. Alliance Designer Products inc. shall not be liable for any other damages whatsoever, direct or consequential. To the extent permitted by law, Alliance Designer Products inc. excludes any implied warranty of quality, merchantability or fitness for purpose.