Liquid Binding Agent

Liquid Binding Agent

Liquid Binding Agent
Keeps stones in place

Description

Mixed Rock Bond with 100% washed and dried riverstone creates a durable permeable and decorative surface. Great for garden pathways where erosion and drainage is a concern, at the same time, it reduces maintenance and clean-up and is durable in extreme conditions.

Features

  • Porous and permeable
  • Keeps stones in place
  • Reduce maintenance and clean up
  • Durable in extreme conditions

Ideal For:

  • Banding, edging, and trimming.
  • Pathways.
  • Walkways.
  • Tree wells.

Application & Instructions

PLEASE NOTE:

Wear gloves to avoid having binder sticking on your hands. Products should be mixed in a wheelbarrow or on a plywood board.

Application Instructions:

Types of rock that can be used with Polybind Rock Bond:
GRANITE – LIMESTONE – MARBLE (1/8” to 3/4“)
these rocks have to be clean, free of dust & 100% dry.

Method of application of ROCK BOND

  1. Prepare a solid base by densely compacting 4” (10 cm) of crushed stones.
  2. Mix in a ratio of one container (1 US gal. / 3.78L) of ROCK BOND with (300 lbs / 136 kg) the above mentioned dry clean stones for 4 minutes. Mix products automatically with a masonry mixer or you can manually mix on a sheet of plywood or in a wheel barrow.
  3. Trowel the mixed riverstone on the surface desired, within 20 minutes after mixing.

Please Note:

  • For pedestrian use only.
  • Works above 60°F / 16°C.
  • Allow 24 hours to dry without rain.
  • All tools could be cleaned using Xylene or Acetone.

Coverage

1 US gal mixed with 300 lbs of dry clean rock will cover 80 sq. ft. at 1/2″ thickness.
(3.78 L mixed with 136 Kg of dry clean rock will cover 7.4 sq. m. at 13 mm thickness.)

Storage

Store in a cool, dry, well ventilated area.Store in upright position.
Store at above freezing temperature 32°F (0°C).

Shelf life is 1 year in original unopened container.

Limited warranty

Alliance Designer Products inc. cannot guarantee results as it has no control over surface and sub-surface preparation and product application. Alliance Designer Products inc. agrees that, if the product is proven to be defective, and on the condition that it was installed pursuant to the method of application of surface and sub-surface preparation described above, then Alliance Designer Products inc. agrees to refund the purchase price. Proof of purchase is required for any claim. EXCLUSION OF RESPONSIBILITY THE PARTIES AGREE THAT REFUND OF THE PURCHASE PRICE AS STATED IS THE ONLY OBLIGATION OF ALLIANCE DESIGNER PRODUCTS INC. IN ALL EVENTS, ALLIANCE DESIGNER PRODUCTS INC., SHALL NOT BE LIABLE FOR ANY OTHER DAMAGES OR COSTS, DIRECT OR CONSEQUENTIAL. TO THE EXTENT PERMITTED BY LAW, ALLIANCE DESIGNER PRODUCTS INC., EXCLUDES ANY IMPLIED WARRANTY OF QUALITY, MERCHANTABILITY OR FITNESS FOR PURPOSE.