Water-Based sealer for Wet Cast products
Polybind Deluxe for Wet Cast products with a Natural look finish, zero gloss and water-based is made from fluorochemical polymers. This sealer penetrates deep into the Wet Cast, thus reducing the oil and dirt penetration, as well as protecting them from the corrosion of de-icing salt.
FOR WET CAST PRODUCTS
Coating Category: Low Solids Coatings. VOC Concentration Limits:
|Products||Retail Size||Per Box||Per Pallet|
|Deluxe Series Wet Cast||1 US gallon (3.78 L)||4 units||24 boxes|
|Deluxe Series Wet Cast||5 US gallon (18.9 L)||0 units||48 pails|
Before applying the product, the user/buyer must determine its suitability for intended use and user/buyer assumes all risks in that regard. It is a condition of the Limited Warranty that before using the product on the intended larger area, the user/buyer must first test the product on a small less observed area of approximately 4 sq.ft. (0.4 m2) to ensure results meet user/buyer’s expectations. In the event that no test is carried out, the Limited Warranty will only apply to 4 sq.ft. (0.4 m2). Alliance Designer Products Inc. cannot guarantee results as it has no control over surface preparation and product application.
If this product is proven to be defective, on the condition that it was applied pursuant to the required method of application and surface preparation, the sole obligation Alliance Designer Products Inc. is to refund the purchase price. Proof of purchase is required for any claim. Alliance Designer Products Inc. shall not be liable for any other damages whatsoever, direct or consequential. To the extent permitted by law, Alliance Designer Products Inc. excludes any implied warranty of quality, merchantability or fitness for purpose.